How To Make A Temporary Shower While Renovating The Bathroom

When renovating a shower, one of the first things that needs to be done is to remove the old shower pan and replace it with a new one. However, if you are short on time and don’t want to hassle with this task, there is an easier way to go about it – by making a temporary shower.

This method works great if you are renovating a small bathroom or if you just need a quick shower while you work on other parts of the project. All you need is some plywood, some screws, and some waterproofing material. Once you have assembled the shower using these simple materials, all you have to do is install the pan and voila! You have a functioning shower without having to waste valuable time removing the old one and installing the new one.

So next time you need to take a quick shower during renovation work, try making use of this temporary shower option instead of spending hours struggling with fixing something that could have been easily fixed in the first place.

How To Make A Temporary Shower While Renovating The

Source: Homearise

How To Make A Temporary Shower While Renovating The Bathroom

When renovating a bathroom, sometimes it’s necessary to take a temporary shower while the work is being done. Here are six easy steps that will help make your temporary shower a breeze!

Purchase Shower Mats

To make the renovation process easier, you may want to purchase shower mats while renovating your bathroom. Shower mats come in a variety of shapes and sizes, so you can find one that fits your needs. Some shower mats have adhesive on the back so that they can be easily attached to the tile or flooring.

Purchase shower mats in advance of your renovation project so that they are ready when you need them. You may also want to consider purchasing waterproof tiles or linoleum for your bathroom floor before starting the renovations. If you choose not to purchase shower mats, be sure to use caution when stepping into the shower; water could fall onto the floor below.

When renovating your bathroom, it’s important to take care of all of the small details so that everything goes smoothly. By following these simple tips, you can avoid some common problems during your bathroom renovation project.

Install A Non-Slip Floor

Installing a non-slip floor in your shower can help make the experience more enjoyable while renovating. There are many different types of products that are available to purchase and install in your shower. You may choose to buy a premade shower mat or you could create your own with grippy material.

You could also choose to buy a waterproof liner for your shower that will keep the floor wet and non-slip. You may also want to consider installing grab bars or rails in case you need help getting out of the shower. A temporary shower while renovating is an easy way to get the job done without having to remove everything from your bathroom walls and start over again.

By installing a non-slip floor, you can avoid slippery conditions during and after your renovation project is complete.

Install A Water Shut Off Valve

If you’re renovating your bathroom and need to install a water shut off valve, there are a few different ways to go about it. You can buy a pre-made shower kit that includes the valve and installation instructions. Alternatively, you can find an online guide that will walk you through the installation process step-by-step.

Either way, once the valve is installed, all you have to do is turn it on when you want to take a shower and turn it off when you’re done. It’s important to note that the valve should be placed close to the showerhead so that it can easily be turned on and off. If you find that your bathroom is flooded frequently due to leaks, then installing a water shut off valve may be your best solution.

By doing this, you can avoid expensive repairs and floods down the road. The best time to install a water shut off valve is during renovation projects because it can save time and money in the long run. Make sure to consult with an expert if you’re unsure of how to go about installing one yourself – they may be able to help guide you through the process easier than ever before! Finally, make sure to test the valve before use by turning it on while taking a shower – just in case there are any surprises later on!

Cover The Shower Area With A Tarp

If you are renovating and don’t have the time or money to tear down and rebuild your shower, there are other options available to you. One option is to cover the entire shower area with a temporary tarp while you continue to work on the renovation. The tarp will protect your flooring and walls from water damage while you finish up your project.

You can buy a temporary tarp in different sizes at most home improvement stores. Make sure that you measure the area where the tarp will be placed before purchasing it so that it will fit properly. Once you have purchased the tarp, simply unfold it and place it over the shower area. Use ties or strips of duct tape to secure it in place covering both the floor and walls of the shower area completely.

Make sure that all openings, such as those for plumbing and electrical wires, are covered by the tarp before closing off the area for renovation work. Don’t worry about cleaning up until after your renovation project is finished; the cleanup process is much easier when everything is dry and clean after being covered by a temporary shower tarp. You can use this same method for covering any wet areas around your house during renovations such as tubs or basements that may flood during heavy rainstorms or snowmelts in wintertime..

Remove The Door And Install A New One

You can remove the door and install a new one while renovating your bathroom without any worries. By doing this, you will be able to save time and money while renovating your bathroom. It is important to use the right tools when removing the door so that the renovation process goes smoothly.

You will also need to make sure that you have all of the necessary permits before starting the project. After taking everything apart, it’s time to install the new door frame. Make sure that you choose a door that matches your existing bathroom decor and style. Once the frame is installed, you can finish up by installing the hinges, locks, and trim pieces.

Finally, you can paint or stain your new shower enclosure to match your bathroom’s colors and design scheme. By following these simple steps, you will be able to renovate your bathroom in no time at all! If you ever have any questions or problems during the renovation process, don’t hesitate to call an expert for help!

Prepare Your Materials

Before renovating or remodeling your shower, it’s important to make sure you have all the materials you need on hand. This includes items like a tarp, plastic sheeting, and screws. By preparing these materials in advance, you can save time and hassle when it comes to installing your temporary shower.

The best way to do this is by organizing everything beforehand so that you don’t have to search for specific items while working on your project. Once you have all of the materials ready, simply follow these simple steps to install your temporary shower.

First, remove the old showerhead and tile backer panel. Then, cover the floor of the shower with a tarp or plastic sheeting to protect it from water damage. Next, use screws to attach the plastic sheeting to the walls and ceiling of the shower enclosure. Finally, put up your new shower head and tile backer panel using screws and anchors that are compatible with both surfaces.


One way to avoid having to take time out of your renovation project to build a new shower is to temporarily install a shower in another room. Another option is to use a portable shower enclosure, which can be easily transported from one room to another.

Finally, you can also improvise by using buckets, barrels, and other makeshift solutions. With a little creativity and planning, renovating your bathroom while staying on schedule is possible!

Similar Posts

Leave a Reply

Your email address will not be published.