10 Dewalt Compressor

Industry leading 2-stage performance

200 maximum PSI provides 53% longer air tool run time vs. 20 gallon 155 PSI belt drive air compressors

6.2 SCFM at 90 PSI provides the ability to operate a larger selection of air tools

Precision Automotive style pistons for greatly improved balance and durability78 dba operational noise level for a quieter work environment than direct drive oil free compressorsHigh flow regulator and coupler provide maximum air flow to air tools

10 in. Heavy-duty Pneumatic wheels for maximum portability around the shop or job site

High efficiency aluminum Flywheel provides maximum air flow and lower start-up ampsAluminum head and valve plate to maximize heat dissipationSuperior O-RING seals to eliminate oil leaks

Industrial performance delivers maximum CFM @ 175 PSI; provides enough power to operate more than one air tool or Device at one timePatented Pump design provides for a cooler Running Pump: industrial style air intake filter; easily Accessible Oil level sight glass and Oil drain with 4” extension; low Pump RPMElectric motor with Thermal Overload protection: protects the motor from voltage fluctuations and magnetic starter not required

Large capacity, 60 gallon ASME* air receiver with large ¾” air outlet port.Amperage:22 amps

Equipped with Tank pressure gauge and on/off switch and wire form belt guard improves Compressor cooling

4 gallon electric wheeled dolly styled air compressor with panel

.0 CFM delivered at 90 PSI

Oil lubricated pump improving durability

4.0 CFM delivered at 90 PSI pump provides rapid recovery

Oil lubricated pump improves durabilityCast iron cylinder enhances pump life10-inch pneumatic wheel and handle kit for ease of mobilityTop load panel with positioning holes allows unit to transport loads up to 100 lbs; High-flow regulator for increased performance

165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered @ 90 PSI pump, enable long tool run time with quick recovery for the portable air compressor

High efficiency motor of the electric air compressor is made for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less]

78.5 dBA noise level of the 6 gallon air compressor is made for a quiet work environment

High flow regulator and couplers of DEWALT portable air compressor are designed to maximize air tool performanceLong life oil free pump for maintenance free operationConsole cover protects controls and is removable to allow easy repairOutlet tube rerouted to avoid being catch point30 lb weight makes unit easy to carry/store2 universal couplers to easily support two usersBall drain valve for quick & thorough tank draining

Air compressor tire inflator comes with high-pressure inflation mode with automatic shutoffDigital tire inflator has high-volume inflation and deflation modesLED light of the portable tire inflator for car helps to provide illumination

Three power sources for inflation on a jobsite and on the go (e.g. 20V MAX battery, 12V DC, or 110V AC)

Convenient onboard accessory storageHeavy-duty rubber feet help reduce walking when in useThreaded chuck for secure connection to inflation valve

3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI of the portable air compressor enables large amount of nails to be fired and provides quick recovery

Durable oil free pump of the electric air compressor provides extended maintenance-free operation

Low 71.5* dBA of DEWALT portable air compressor allows for quieter operation (*Tested per ISO3744)

Low 12 amp draw motor provides easy start-up and reduces breaker tripping

Lightweight (36 lbs), thin (12.5 inch) and compact design is easy to carry and store

Compressor can be operated/stored in either the vertical or horizontal positionRoll cage and control panel provide protection to key compressor componentsDual quick couplers to easily support 2 nailersBall valve drain allows for quick and thorough tank drainingConvenient cord wrap for easy storage

DWFP12231 Brad Nailer drives 18ga nails from 5/8″ to 2″ length.

DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI

Tool-free depth-of-drive adjustment and tool-free jam release

Low 75.5 dBA for a quiet work environment

Kindly refer user manual for instructions.

DWFP12231 Brad Nailer drives 18ga nails from 5/8″ to 2″ length.

DWFP55126 Compressor offers 2.6 SCFM delivered at 90 PSI pump, 6 gallon (22.7 L) tank and 165 max PSI

Tool-free depth-of-drive adjustment and tool-free jam release

Low 75.5 dBA for a quiet work environment

5.1 SCFM at 90 PSI provides faster recovery times resulting in increased project efficiency

6.8 SCFM at 40 PSI provides the ability to operate a HVLP spray gun

78 dBA brings less noise to your work environment and is 30% more quiet than similar oil free induction products

Low volt easy start motor will operate with extension cords of at least 12 gal. and 50 ft. or less

High flow regulator and couplers provide max air flow to your tool to operate at their peak performanceRobust dual purpose handle provides additional protection to the compressor along with serving as a hose wrap

2 in. gauges allow for an easy to read surface

This unit ships small parcel (UPS or Fed Ex)

Heavy-duty 1-gallon trim compressor with protective roll cage

135 psi maximum, durable oil-free pump, low 71 dB rating, low 2.6 amp motor

Includes 1 compressor; hose & nailer not included9-inches wide; 24 pounds; 1-year warranty

Cast iron cylinder enhances pump lifeOil lubricated pump improves durability

3.2 CFM delivered at 100 PSI pump enables quick recovery

Voltage: 120.0